oil processing

Key oil press before start:

1, before starting the first gear box with 10 kg of oil.

2, available dry cake with proper water about 6-8%, stir evenly and feeding hopper pressing chamber, the press bore polish, begin feeding, dry cake should be slowly,not too fast, the discharge is normal, and appropriately increase the feeding quantity,repeated use of the cake moisture gradually reduced, the appropriate water. If the cake to feed too fast, too dry can make the pressing chamber pressure surge, caused the press bore blockage, causing the machine accident.

3, oil machine the squeezing chamber temperature is appropriate, there will be good pressing effect, therefore, should try to improve the pre pressing pressing chamber temperature. The method of blank can be fried hot, dry cake can also be used to heat water mix, slow feed mill, repeatedly, until the temperature rises, until the outer surface of hot date, then the normal press.‍