The basic process of pressing process oil

1 conventional production process: raw materials - steamed fried - press - machine pressed crude oil
(2) Special grease production process: Oil processing - Broiling - press - filter - fragrance oils
Three special oil production process: Oilseeds - whole seed cold pressing - filter - cold-pressed oils
Fuel oil is squeezed out of the process: When the fuel into the oil press virgin bore, with the pressing chamber rotates, the pressure increases. As the seed material extruded continuously squeezing oil, virgin material particles in direct contact with each other and cause a pressure deformation of seed material, particularly in the oil film rupture and the adhesive body. Such bombing bore after being squeezed, squeezed material is not a nmb seed oil press to form a plastic body, called the cake. Squeeze due to the dual role of temperature and pressure, will continue to deteriorate protein, thereby affecting virgin plastic material, in short, in order to ensure an appropriate level of protein denaturation best squeeze out the oil effect.

How to improve the oil yield oil processing

Before using the press, first of all should be ready aids and containers , check and adjust the belt tightness . Then start the motor , the machine empty running around 15min, check the speed of the pressing screw shaft. Average speed should be around 33dmin. Do you want to pay attention to when idling gear box gear meshing and sound normal, whether nmb oil equipment and motor parts properly. When press idling , the motor current should be about 3A. If the current is too high , you should immediately stop checks, adjustments and then boot.
After the load is normal, around 50kg ready rapeseed or soy , ready to put into the hopper . Note: When you start squeezing feed not too fast, otherwise the sudden increase in pressure within the bore virgin , virgin not turn the screw shaft , causing blockage virgin bore , even to squeeze cage rupture, a major accident . So at the beginning of the compression , the seed oil press be evenly slowly into the hopper , so press be run together . So repeatedly , sustained more than 3 ~ 4h , so press the temperature gradually increased , and even take smoke ( this is normal ) . At the start of the press virgin bore low temperature, can be slowly twist the handle on the withered section stud , increase the thickness of the cake , while improving water into juice billet , to be squeezed bore temperature. Rose to about 90 ℃, the normal operation of the press , the cake thickness can be adjusted to 1.5 ~ 2.5mm, and tighten the nut tightened.

All buy peanut oil refinery

In this regard, I own processing edible oil is not very good , but I have to learn too , we usually do not pay attention to this aspect of these people are very often go where they learn, because we NMB seed oil press out of the oil processing indeed looks very nice , with its fried Choi Heung great. And shortly after a friend told me that , because the company needs employees too much oil processing , resulting in a machine enough. Prepare a relative oil mill in the vicinity of the unit open , and promised us that he ensure that all purchases of machinery oil press , and continues to employees at preferential processing . This news makes us very happy , we can not NMB fruit dehydrator late own oil , but we can also use these enough to peanut processing edible oil press to others , we can also earn processing fees during this period , but also we own an income ah , this method is very good , we can try Oh !