2013年8月1日星期四

Pressing screw mounted demolition of law and law

A) pressing screw demolition of France: oil press down immediately after moving the handle, squeeze the juice from the axis of the bore draw, remove the protective cap, round nuts, bearings and adjusting bolt. Food dehydrator with a diameter of 16 hole insert locknut counterclockwise rotation, remove the lock nut, each section can be removed pressing screw. Removing bad as pressing screw, Can be heated before removing the wood fire.
(2) Pressing screw mounting: the virgin oil equipment screw erect, narrow end up, and then the slag Shaotou and pressing screw followed by Arranging the order 7,6,5,4,3,2,1 Mounted on the shaft and then loaded asbestos gasket, and then tighten the nut to prevent the infiltration of diesel spiral, the impact of the demolition of the pressing screw, and then loaded bearings and tune 8309Xie bolts Caution Install two bearing surfaces are large holes at both ends against the adjusting bolt face, pressing screw Qi overall installed with two M42 × 2 nuts back tight, tight back Note that two 8309 bearing clearance. Turn the adjusting bolt by hand to move, when you can feel the flexible rotation. Automatic vacuum screw press made ??of high quality steel, high precision, low noise, high degree of automation, simple operation, continuous production ability. The machine For extraction of soybean, rapeseed, cottonseed, peanut, sesame, tea seed, corn germ, sunflower seed and other oil crops, is around the small oil refinery and oil mill Preferred oil extraction equipment.

没有评论:

发表评论