Some granulator daily use and maintenance processes Precautions

 
  1, strictly Food dehydrator the rules and operation of plastic machinery, not in the non-operative position for illegal operations. To ensure the reliability of safety devices, must not chase

Sake of efficiency destruction of the machine safety precautions.

     2, injection molding machine will use cleanliness, viscosity and other indicators are in line with the requirements of hydraulic oil expeller accordance with regulations for the oil cooler to provide sufficient cooling water flow to

Free hydraulic components and piping heat generated due to oil contamination or blockage, leakage and other damage phenomena. Extruder Fill the gear unit should meet the requirements of lubricants.

     3 Do not use with metal impurities or low-quality sand back, feed shall be placed near the mouth of the metal objects that might fall into, to prevent intensified screw and barrel

Wear or produce stuck, damage phenomenon.

     4, the material temperature does not reach the set temperature, holding time is not enough, are not allowed to start running screw.

     5, when a failure or abnormal condition of the staff must be reported by a professional maintenance staff for processing. If found to affect the safety of unusual

Phenomena, and immediately press the emergency stop switch.

     6, attention to fire safety, fire extinguishers need to be placed near a device using the HTF.